Form-In-Place

Product highlights

- Small consistent bead can be applied to thin walls, saving labor and elimination material waste

- Soft compressible materials

- Effective alternative to traditional application of gasket

- Automated process capable of irregular shapes and tight tolerances

- Dispense on metal or plastic

ELECTRICAL SHIELDING EFFECTIVENESS

Transfer Impedance (500 Mhz)
85 - 120 dB
H-field (200 Khz Mil 285)
50 - 70 dB
Plane Wave 2 Ghz) Mil 285
70 - 100 dB
Surface Resistivity
N/A
Volume Resistivity
0.002 - 0.015 ohm-cm

MECHANICAL

Available Size Range
Height: 0.014 - 0.090 (0,36 - 2,3) Wide: 0.015 - 0.125 (0,38 - 3,1)
Deflection Operating Range
15 - 20% Deflection
Compression Force (based on shape selection)
1.5 lbs/lin. (0,27 Kg/cm) @ 0.022 (0,56) height @ 20% Deflection
Compression Set
<20% @ 50% deflection
Joint Unevenness Accommodation
0.002 - 0.006 (0,05 - 0,15)
Compund/Material Availability
Elastomer Silicone fillers: Ag/AL, Ag/Cu, Ag/Glass, Ag/Ni, Ni, Ni/Graphite
Temperature Range
-58 - 212°F (-50 - 100°C)
Available Profiles
"D" Shape Bead
Mounting Methods
Directly applied to mounting surface
Custom Shapes Available
Infinite variety of patterns Larger custom bead sizes

ENVIRONMENTAL

Fluid Seal
Moisture, rain seal
Air/Dust
In limited applications
Galvanic Compatibility
Available in four compounds to provide galvanic with most mating materials

APPLICATIONS

Typical Applications for Shielding Gaskets
Ideal in application with miniature electrical housings with thin wall construction and intricate multi components; i.e., cell phones, hand held devices, electromedical devices.